Medical Cold Compression Therapy Machine For Ankle Acute Sprained
Medical Cold Compression Therapy Machine For Ankle Acute Sprained
integrated cold and compression function, helps to reduce
post-operative swelling. The Cryo Cuff Cooler provides both gravity
and motorized cold and compression therapy for flexibility of care.
The optional pneumatic pump provides automated cold and compression
therapy, with simplicity of design and ease-of- use operation.
Components:
All Cryo/Cuffs can be ordered as a single cuff, or with a cooler
(including a tube assembly and pump system ). The Cooler is
available separately and can be used with any model in the
Cryo/Cuff line.
Cuff: covers the body part(include 9 parts,such as the head,
shoulder, elbow, hand and wrist, back, knee, leg, ankle) with
pressured ice water
Cooler: High:29cm,Diameter:19cm,Measures:3.87L, holds enough water
and ice for 6-8 hours of cryotherapy
Tube: exchanges the water between cuff and the cooler
Automatic Circulation System: make the water in the cooler flow
into the cuff intermittently
| Item Name: | Shoulder cold compression therapy machine system |
| Item No.: | B2-M |
| Color: | Blue |
| Logo: | Can be customized |
| Material: | PVC velvet laminate |
| Feature: | 1. Easy-to-use operation for clinic and home care, are reuseable
,no danger of tissue damage |
| 2. Improved the patient's compliance and tolerance, especially for
elder patients. |
| 3. Widely used in clinical, It can be used for hot and cold
therapy. |
| 4. The use of more secure and convenient for hospital, school,
sports teams and so on. |
| 5. 10 different types for each body part. |
Operation:
1. Prepare cooler: Connect the blue tube to the cooler. Add cold
water.
to the line inside the cooler, then add ice to the top of the
cooler. Allow 5 minutes with occasional shaking to chill the water.
2. Apply the cuff: Always apply it empty. Secure the top strap,
snug but not tight. Adjust the front opening so the cuff fits the
slightly injured part. Secure the bottom strap loosely. Do not
stretch the elastic.
3. Fill and pressurize: Connect the tube to the cuff. Open the air
vent on the cooler. Elevate the cooler and hold for about 30
seconds to pressurize the cuff. The cooler can now be disconnected
by pressing the metal tab on the quick – disconnect while the
cooler is elevated to seal the pressure.
4. Rechill: Rechill the water once an hour or as needed. Connect
the tube,lower the cooler and the warmed water will drain from the
cuff into the cooler. Allow a couple of minutes for the water to
mix with the ice and rechill, then elevate the cooler and repeat
the filling process.
